Eaton MAB50R Işın Tipi Dedektör

Eaton MAB50R, Addressable beam detector ailesine ait ışın tipi dedektör modelidir. Öne çıkanlar: IP40 koruma sınıfı, EN54 Pt17 (Short Circuit Isolator) uyumluluğu.

Eaton Addressable beam detector, Addressable, Beam, EN54 Systems, 5-50m

Eaton's beam detector provides excellent smoke detection compared to standard optical detectors in large, open areas such as warehouses, factories, arenas and airports. Utilising reflective detection technology, the detector is formed by two parts: the transmitter-receiver that emits a constant beam of infra-red light and a reflector with a prism that angles the beam back at the transmitter-receiver. A fire is indicated to the panel when the beam is distorted. Fire and fault conditions are signalled to the control panel using standard loop wiring, so no additional interconnection is required. While installation time and the requirement for wiring is limited compared to end-to-end beam detectors due to wiring only being required at the transmitter-receiver end. The range includes two options: up to 50 metres (which has one reflector) and up to 100 metres (which has four reflectors in formation) depending on the size of space.

Hassle-free detector testing

Testing beam detectors can be an awkward and time-consuming task. That's why each of our beam detectors is supplied with a test filter to simulate required smoke obscuration levels and confirm correct operation. Reducing the time taken to test and costs associated with a facility manager testing the system.

Easy connection to the panel with no additional interconnection

Both the 50 and 100-metre beam detectors use standard loop wiring means fire and fault conditions are signalled to the fire control panel meaning no additional interconnection is necessary. Reducing the amount of wiring required and time taken to install.

Nerelerde kullanılır?

Yangını duman veya ısı artışıyla en erken aşamada algılayarak yangın alarm paneline bildirir; tahliye için kritik zaman kazandırır.

Kurulum ve uyumluluk

Yangın algılama sistemleri; Binaların Yangından Korunması Hakkında Yönetmelik ve TS EN 54 standardına uygun olarak projelendirilmeli ve yetkili ekiplerce devreye alınmalıdır.