GST DC-9105E Konvansiyonel Işın Tipi Dedektör

GST DC-9105E, EN54 (CE) ürün gamında yer alan konvansiyonel ışın tipi dedektör modelidir. Öne çıkan değerler: çalışma gerilimi DC 24V (16V～28V）.

GST DC-9105E Conventional Reflective Beam Detector

DC-9105E is a conventional reflective beam detector, powered by 24V. with excellent built-in microprocessor, the detector can carry out system adjustment, drift compensation of ambient data, and judgment of fire and fault through fixed algorithm. The detector has an integral visible laser pointer and 2 bits digital tube. It is easy to install and align with the reflector, convenient for commissioning with indications of 2 bits digital tube displaying received light intensity. The sensitivity of the detector can be set through handheld programmer in field, suitable for various applications including large storage zones, shopping malls, fitness centers, gyms, exhibition halls, hotel lobbies and areas with complex ceilings.

Özellikler

• 24V powered.
• Wide operating voltage range, large monitoring areas.
• Combination of the emitting and receiving part makes mounting easy and optical pathway accurate.
• Built-in microprocessor enables Conventional judgment about fire alarm and fault.
• Easy alignment and commissioning via supporting of onboard laser pointer and digital signal intensity indication.
• Self-diagnostic function can monitor the internal fault.
• Drift compensation for factors changing, such as a certain of dust accumulation, positional excursion, 21 21 Structure and Operation Principle 1) Appearance of the detector is shown in Fig.1.
• It is not roofed.
• The ceiling is lower than 1.5m.
• There is much dust, powder or vapor.
• It generates a lot of dust in some certain conditions even though it is clean in normal state.
• The places are very hot. Note: The air temperature in the transparent ceiling will exceed 55℃ while the sun is shining.

Nerelerde kullanılır?

Yangını duman veya ısı artışıyla en erken aşamada algılayarak yangın alarm paneline bildirir; tahliye için kritik zaman kazandırır.

Kurulum ve uyumluluk

Yangın algılama sistemleri; Binaların Yangından Korunması Hakkında Yönetmelik ve TS EN 54 standardına uygun olarak projelendirilmeli ve yetkili ekiplerce devreye alınmalıdır.

Tüm özellikler

• 24V powered.
• Wide operating voltage range, large monitoring areas.
• Combination of the emitting and receiving part makes mounting easy and optical pathway accurate.
• Built-in microprocessor enables Conventional judgment about fire alarm and fault.
• Easy alignment and commissioning via supporting of onboard laser pointer and digital signal intensity indication.
• Self-diagnostic function can monitor the internal fault.
• Drift compensation for factors changing, such as a certain of dust accumulation, positional excursion, 21 21 Structure and Operation Principle 1) Appearance of the detector is shown in Fig.1.
• It is not roofed.
• The ceiling is lower than 1.5m.
• There is much dust, powder or vapor.
• It generates a lot of dust in some certain conditions even though it is clean in normal state.
• The places are very hot. Note: The air temperature in the transparent ceiling will exceed 55℃ while the sun is shining.