GST DI-9309 Adresli Giriş/Çıkış Modülü
DI-9309GST DI-9309, EN54 (CE) ürün gamında yer alan adresli giriş/çıkış modülü modelidir. Öne çıkan özellikleri: EN 54 uyumluluğu.
- Sertifika
- EN 54
- Sistem tipi
- Adresli
Adet ve proje bilginize göre güncel fiyat, stok ve teslim süresini iletelim.
- Max. 16 channels of independent inputs. The quantity can be set as required.
- Input signals are insulated from the loop.
- Two channels of independent dry contact output.
- 3-18 consecutive addresses, changing with selected channel quantity.
- Power supply monitored.
- Cable monitored for open circuit and short circuit.
Teknik özellikler
Üretici veri sayfasından derlenmiştir; proje öncesi güncel datasheet ile teyit edilmesi önerilir.
Teknik Özellikler 12 satır
| Çalışma Gerilimi | Loop: 24V (16V~28V). Power Supply: 24VDC (20V~28V). |
|---|---|
| Bekleme Akımı | Loop 1.5mA Power 50mA |
| Aktif Akım | Loop 3mA Power 100mA |
| Çıkış Kapasitesi | Output contact capacity: 220V/2A. |
| Programlama Yöntemi | Electronically programming. |
| Adres Aralığı | Occupying 3-18 addresses, the output address of Channel 1 can be set within 1~225. |
| Action Indicators | Red. Separate polling indicator HL0. Individual state LED (n) for each input channel. Flashes in fault state. Illuminates in action state. Quiet in normal supervisory. HL1 and HL2 for each channel output. Illuminates when activated. |
| Ortam Sıcaklığı | -10°C ~ +50°C |
| Bağıl Nem | 95%, non condensing |
| Montaj Delik Aralığı | 190mm × 90mm |
| Boyutlar (L×W×H) | 200mm ×100mm × 20mm |
| Ağırlık | About 240g |
Genel bakış
GST DI-9309 kullanım alanları ve özellikleri.
GST DI-9309, EN54 (CE) ürün gamında yer alan adresli giriş/çıkış modülü modelidir.
GST DI-9309 Addressable Multi-Channel Interface
An integrated solution for application of multi-input signals, saving mounting space and installation cost. With microprocessor, DI-9309 Addressable Multi-Channel Interface can communicate with fire alarm control panel (FACP), monitor power supply, and judge the logic state of input signal, control output and state indicators. Each output channel occupies a n individual address and receives start command from FACP, energizes the related relay, gives dry contact output. Each input is corresponded to one address to receive the state signal and transmit it to FACP. The quantity of channels can be set by jumpers.
Özellikler
- Max. 16 channels of independent inputs. The quantity can be set as required.
- Input signals are insulated from the loop.
- Two channels of independent dry contact output.
- 3-18 consecutive addresses, changing with selected channel quantity.
- Power supply monitored.
- Cable monitored for open circuit and short circuit.
Nerelerde kullanılır?
Yangın algılama sisteminde giriş/çıkış kontrolü, loop izolasyonu veya kurulum aksesuarı olarak kullanılır.
Kurulum ve uyumluluk
Yangın algılama sistemleri; Binaların Yangından Korunması Hakkında Yönetmelik ve TS EN 54 standardına uygun olarak projelendirilmeli ve yetkili ekiplerce devreye alınmalıdır.
Dokümanlar
Veri sayfası ve kullanım kılavuzları.
Sık sorulanlar
DI-9309 hakkında kısa yanıtlar.
DI-9309 EN 54 sertifikalı mı?
DI-9309 fiyatı ne kadar?
Hızlı teklif
Formu doldurun, DI-9309 için fiyat ve teslim süresini iletelim.
Yangın Modülü & Aksesuar
GST CE (EN54) Ürünleri
