GST GST102A Konvansiyonel Yangın Alarm Paneli

GST GST102A, EN54 (CE) ürün gamında yer alan konvansiyonel yangın alarm paneli modelidir. Öne çıkan değerler: standart: EN 54-2 1997 + A1: 2006; EN 54-4 1997+A1: 2002+A2:2006.

GST GST102A Conventional Fire Alarm Control Panel

GST102A Conventional Fire Alarm Control Panel is designed in compliance with EN 54-2 1997 + A1: 2006 & EN 54-4 1997+A1: 2002+A2:2006 standard. It’s compatible with GST conventional detectors, manual call points and sounders. The panel is easy to install and operate. Control functions are enabled by a key switch. Programming functions are enabled by a key switch and an internal switch.

Özellikler

• 2 zones.Each zone can have maximum 32 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32
• Each zone can be programed work as fire alarm (default) or supervisory alarm mode
• Each zone include 2 indicators, 1st indicator is bi-color( Red and Green), factory default to indicate fire condition. Red color on in case fire signal triggered; also can be programed to indicate supervisory condition. Green color on in case superisory signal triggered. 2nd abmer indicator flashes when the zone is in fault condition(0.5:0.5).
• 3x sounder outputs, output 1 can be setup 24V or N/O N/C, output 2 and 3 only work as 24V output
• 1x Disable/supervisory relay ouput (N/O COM N/C)
• 1 x Fault output (N/O COM N/C)
• 1x Auxilary power output: output current 450mA in standby mode and Maximum 1000mA in alarm mode when the Alarm Output been set to a normally open/close contact type
• Able to report short circuit and open circuit of detection zones, sounder outputs and alarm output
• D esigned with standby batteries and space provision for two sealed lead-acid batteries
• Easy operation to enable/disable zones, sounder outputs and alarm output
• Alarm Test function selectable with or without sounder notification
• Output programmable for interlink between zones and sounder outputs, alert or evacuate tone, with or without delay

Sertifikalar ve Uyumluluk

• Standards: EN 54-2 1997 + A1: 2006; EN 54-4 1997+A1: 2002+A2:2006
• Certifications: LPCB Technic al Specification Primary Supply 220/230VAC + -11 50 %% , 50/60Hz Standby Power 7AH/24VDC Maximum internal resistance of the 1 batteries Zone Quantity 2 Device Capacity 32 detectors per zone End of Line for AEOL (a ctive end of line) or EOLR zone (0.5Watt/4.7k ) End of Line for EOLR (0.5Watt/4.7k ) others Sounder output, Alarm output Protection IP30 EN54-2 1997 + A1: 2006, Standard EN 54-4 1997+A1: 2002+A2:2006 Approval LPCB Operating 0°C ~ +40°C Environment 95%, non condensing Dimensions 430mm(W)x320mm(H)x98mm(D) Weight 4.0kg

Nerelerde kullanılır?

Binadaki dedektör, buton ve sirenleri yöneten yangın algılama sisteminin merkezidir; alarmın yerini gösterir, tahliye uyarısını başlatır ve diğer sistemlerle (asansör, havalandırma, kapılar) entegre çalışır.

Kurulum ve uyumluluk

Yangın algılama sistemleri; Binaların Yangından Korunması Hakkında Yönetmelik ve TS EN 54 standardına uygun olarak projelendirilmeli ve yetkili ekiplerce devreye alınmalıdır.

Tüm özellikler

• 2 zones.Each zone can have maximum 32 conventional detectors. The total number of detectors and call points in a zone shall not exceed 32
• Each zone can be programed work as fire alarm (default) or supervisory alarm mode
• Each zone include 2 indicators, 1st indicator is bi-color( Red and Green), factory default to indicate fire condition. Red color on in case fire signal triggered; also can be programed to indicate supervisory condition.
• 3x sounder outputs, output 1 can be setup 24V or N/O N/C, output 2 and 3 only work as 24V output
• 1x Disable/supervisory relay ouput (N/O COM N/C)
• 1 x Fault output (N/O COM N/C)
• 1x Auxilary power output: output current 450mA in standby mode and Maximum 1000mA in alarm mode when the Alarm Output been set to a normally open/close contact type
• Able to report short circuit and open circuit of detection zones, sounder outputs and alarm output
• D esigned with standby batteries and space provision for two sealed lead-acid batteries
• Easy operation to enable/disable zones, sounder outputs and alarm output
• Alarm Test function selectable with or without sounder notification
• Output programmable for interlink between zones and sounder outputs, alert or evacuate tone, with or without delay