Honeywell System Sensor 6500E Adresli Işın Tipi Dedektör

Honeywell System Sensor 6500E, System Sensor Addressable Beam Detectors ailesine ait adresli ışın tipi dedektör.

• Kızılötesi (IR) algılama
• Loop beslemeli / loop bağlantılı
• IP54 koruma sınıfı

6500E and 6500SE are addressable reflector-type linear optical beam smoke detectors, designed to operate as a component of an intelligent fire alarm system and typically used for protecting buildings with large open spaces.

The 6500E and 6500SE beam detectors are combined transmitter/receiver units that can be directly connected to an analogue loop circuit. The Infra-Red transmitter generates a beam of light towards a high efficiency reflector. The reflector returns the beam to the receiver where an analysis of the received signal is made. The change in the strength of the received signal is used to determine the alarm condition. The 6500SE features a unique remote test capability that fully tests both the optics and the electronics of the device. An optical filter is automatically introduced in front of the optics, attenuating the returned beam and causing the unit to go into alarm.

Features

• Unique servo-operated test filter
• Combined transmitter and receiver unit
• Range 10 – 100 metres (6500SE)
• 4 x fixed sensitivity/threshold levels
• 2 x automatic variable sensitivity modes
• Operates in the Infra-Red light spectrum
• Numerical indicators to aid beam alignment
• Standby, fault and alarm LED indicator visible from the front and bottom
• ±10° horizontal and vertical beam alignment
• Automatic drift compensation
• Uses the Series 200 Advanced protocol
• Loop powered
• IP 54
• -30°C to +55°C operating temperature range

Nerelerde kullanılır?

Yangını duman veya ısı artışıyla en erken aşamada algılayarak yangın alarm paneline bildirir; tahliye için kritik zaman kazandırır.

Kurulum ve uyumluluk

Yangın algılama sistemleri; Binaların Yangından Korunması Hakkında Yönetmelik ve TS EN 54 standardına uygun olarak projelendirilmeli ve yetkili ekiplerce devreye alınmalıdır.

Tüm özellikler

• Kızılötesi (IR) algılama
• Loop beslemeli / loop bağlantılı
• IP54 koruma sınıfı
• Unique servo-operated test filter
• Combined transmitter and receiver unit
• Range 10 – 100 metres (6500SE)
• 4 x fixed sensitivity/threshold levels
• 2 x automatic variable sensitivity modes
• Operates in the Infra-Red light spectrum
• Numerical indicators to aid beam alignment
• Standby, fault and alarm LED indicator visible from the front and bottom
• ±10° horizontal and vertical beam alignment
• Automatic drift compensation
• Uses the Series 200 Advanced protocol
• Loop powered
• IP 54